Fiber Cable Manufacturer

TEL: +86-769-81209595
Categories
Contact Us

Add: No.101 B.S. Industrial Zone, Wangniudun Town, Dongguan City, Guangdong, China
Tel: +86-769-81209595
Mob: +8613242086178 (WeChat or Whatsapp)
E-mail: milton@hgcable.cc
Helen Golden: helen@hgcable.cc

Outdoor Duct Fiber Cable GYTS

Outdoor Duct Fiber Cable GYTS

Cross section of a single-mode optical fiber patch cord end, taken with a Fiberscope. The round circle is the cladding, 125 microns in diameter. Debris is visible as a streak on the cross-section, and glows due to the illumination.
Chat Now

1-288 cores  GYTS Armoured Optical Fiber Cable

Central strength member

1.8mm Steel

Outer diameter

Vary from 7 to 14mm

Application

aerial or duct fiber optical cable networking system

Cores available

2,4,6,8,12,24,36,48,72,96,144,288

Cores type

G652D,G657A1,G657A2, G655C

Attenuation @1310nm

 ≤0.36dB/km

Attenuation @1550nm

 ≤0.22dB/km

OEM/ODM

Yes

Package

1/2/3/4/5km each exporting wooden drums

Cover

PE,HDPE

GYTS fiber cable

More Academical knowledge for fiber cores :

Cross section of a single-mode optical fiber patch cord end, taken with a Fiberscope. The round circle is the cladding, 125 microns in diameter. Debris is visible as a streak on the cross-section, and glows due to the illumination.

A typical single-mode optical fiber has a core diameter between 8 and 10.5 µm[5] and a cladding diameter of 125 µm. There are a number of special types of single-mode optical fiber which have been chemically or physically altered to give special properties, such as dispersion-shifted fiber and nonzero dispersion-shifted fiber. Data rates are limited by polarization mode dispersion and chromatic dispersion. As of 2005, data rates of up to 10 gigabits per second were possible at distances of over 80 km (50 mi) with commercially available transceivers (Xenpak). By using optical amplifiers and dispersion-compensating devices, state-of-the-art DWDM optical systems can span thousands of kilometers at 10 Gbit/s, and several hundred kilometers at 40 Gbit/s.[citation needed]

The lowest-order bounds mode is ascertained for the wavelength of interest by solving Maxwell's equations for the boundary conditions imposed by the fiber, which are determined by the core diameter and the refractive indices of the core and cladding. The solution of Maxwell's equations for the lowest order bound mode will permit a pair of orthogonally polarized fields in the fiber, and this is the usual case in a communication fiber.

OS1 and OS2 are standard single-mode optical fiber used with wavelengths 1310 nm and 1550 nm (size 9/125 µm) with a maximum attenuation of 1 dB/km (OS1) and 0.4 dB/km (OS2). OS1 is defined in ISO/IEC 11801,[6] and OS2 is defined in ISO/IEC 24702

Hot Tags: outdoor duct fiber cable GYTS, China, suppliers, manufacturers, factory
Related Products
  • Contact Us

    Add: No.101 B.S. Industrial Zone, Wangniudun Town, Dongguan City, Guangdong, China
    Tel: +86-769-81209595
    Mob: +8613242086178 (WeChat or Whatsapp)
    E-mail: milton@hgcable.cc
    Helen Golden: helen@hgcable.cc

  • Categories
  • Copyright © Dongguan Hongguang Cable Co.,Ltd All Rights Reserved.