Fiber Cable Manufacturer

TEL: +86-769-81209595
Categories
Contact Us

Add: No.101 B.S. Industrial Zone, Wangniudun Town, Dongguan City, Guangdong, China
Tel: +86-769-81209595
Mob: +8613242086178 (WeChat or Whatsapp)
E-mail: milton@hgcable.cc
Helen Golden: helen@hgcable.cc

Singlemode Fiber Optic Cable

Explosive gases or vapors might be present in manholes or handholes due to gas leaking from nearby pipelines, tanks, or the soil. Before entering any manhole test its atmosphere with an approved test kit for flammable, explosive, and poisonous gases.
Chat Now

1-288 cores  GYTA Armoured Optical Fiber Cable

Central strength member

1.8mm Steel

Outer diameter

Vary from 7 to 14mm

Application

Aerial ,duct, pipeline, underground

Cores available

2,4,6,8,12,24,36,48,72,96,144,288

Cores type

G652D,G657A,G655C

Attenuation @1310nm

 ≤0.36dB/km

Attenuation @1550nm

 ≤0.22dB/km

OEM/ODM

Yes

Package

1/2/3/4/5km km each exporting wooden drums

Cover

PE,HDPE

GYTA fiber cable2

Learn more about fiber optic cable:

4.5 Safety During Installation

Manhole/Underground Vault Safety:

Explosive gases or vapors might be present in manholes or handholes due to gas leaking from nearby pipelines, tanks, or the soil. Before entering any manhole test its atmosphere with an approved test kit for flammable, explosive, and poisonous gases.

Avoid usage of any device that produces a spark or flame in or near a manhole.

To minimize the risks of an accident in the work area, follow the existing rules for setting up warning signs, barricades, manhole guards, and cones. Before pulling cable directly from a figure-8 configuration, make sure that the area inside the loop of the cable (figure-8) is clear of personnel and equipment. Failure to do so may result in injury to the personnel or damage to the cable.

Ensure that the tools and equipment used for the cable installation are in proper working order. Improperly functioning equipment may damage cables or cause injury to personnel.

Be careful when working near electrical hazards, if electric lines are passing through or near the right-of-way where installation is being performed.

Bond all metallic components in the underground system together. At all points where anyone may come in contact with the metallic components of the underground cable system, ground the bonded metallic components to a proper earth ground to avoid electric hazards produced by power lines or any other means.

Working Safely:

Placing optical cable and jetting micro-duct cable require sophisticated operations and use equipment that many placing crews may not be experienced with. As a result, Sterlite recommends using a placing crew that is familiar with and has experience with the cable being placed and the procedures and equipment being used. Approved personal safety equipment, such as hard hats, safety shoes, safety glasses, reflective traffic vests, and gloves shall be used for all outside plant construction activities.

Engineering details

Typically, best use scenarios for this technology are:

LAN-to-LAN connections on campuses at Fast Ethernet or Gigabit Ethernet speeds

LAN-to-LAN connections in a city, a metropolitan area network

To cross a public road or other barriers which the sender and receiver do not own

Speedy service delivery of high-bandwidth access to optical fiber networks

Converged Voice-Data-Connection

Temporary network installation (for events or other purposes)

Reestablish high-speed connection quickly (disaster recovery)

As an alternative or upgrade add-on to existing wireless technologies

Especially powerful in combination with auto aiming systems, this way you could power moving cars or you can power your laptop while you move or use auto-aiming nodes to create a network with other nodes.

As a safety add-on for important fiber connections (redundancy)

For communications between spacecraft, including elements of a satellite constellation

For inter- and intra-chip communication[36]

The light beam can be very narrow, which makes FSO hard to intercept, improving security. In any case, it is comparatively easy to encrypt any data traveling across the FSO connection for additional security. FSO provides vastly improved electromagnetic interference (EMI) behavior compared to using microwaves.

Hot Tags: singlemode fiber optic cable, China, suppliers, manufacturers, factory
Related Products
  • Contact Us

    Add: No.101 B.S. Industrial Zone, Wangniudun Town, Dongguan City, Guangdong, China
    Tel: +86-769-81209595
    Mob: +8613242086178 (WeChat or Whatsapp)
    E-mail: milton@hgcable.cc
    Helen Golden: helen@hgcable.cc

  • Categories
  • Copyright © Dongguan Hongguang Cable Co.,Ltd All Rights Reserved.