Fiber Cable Manufacturer

TEL: +86-769-81209595
Categories
Contact Us

Add: No.101 B.S. Industrial Zone, Wangniudun Town, Dongguan City, Guangdong, China
Tel: +86-769-81209595
Mob: +8613242086178 (WeChat or Whatsapp)
E-mail: milton@hgcable.cc
Helen Golden: helen@hgcable.cc

GYTA Optical Cable 6 Core

While loading or unloading cable reels, care must be taken to prevent collision with other reels, or damage to the reel or cable. The reel should not be rolled over a long distance. If it is necessary to roll the reel, it should be rolled on both flanges in the direction indicated by the arrow on the flange.
Chat Now

1-288 cores  GYTA Armoured Optical Fiber Cable

Central strength member

1.8mm Steel

Outer diameter

Vary from 7 to 14mm

Application

Aerial ,duct, pipeline, underground

Cores available

2,4,6,8,12,24,36,48,72,96,144,288

Cores type

G652D,G657A,G655C

Attenuation @1310nm

 ≤0.36dB/km

Attenuation @1550nm

 ≤0.22dB/km

OEM/ODM

Yes

Package

1/2/3/4/5km km each exporting wooden drums

Cover

PE,HDPE

GYTA fiber cable2

Learn more about fiber optic cable:

Cable Protection and Handling

While loading or unloading cable reels, care must be taken to prevent collision with other reels, or damage to the reel or cable. The reel should not be rolled over a long distance. If it is necessary to roll the reel, it should be rolled on both flanges in the direction indicated by the arrow on the flange. The reel should never be stored on its side (do not store a reel flat on one flange). Cable reels should always be stored on a flat surface with blocks placed under the flanges to prevent rolling in either direction. The cable on the reel should be covered at the factory with a UV/thermal wrap until just prior to installation to protect it from exposure to the sun and high temperatures. The reel should never be dropped (i.e. off of a flatbed truck).

One of the most important steps in the engineering and placement of optical cable is the preconstruction site survey. During this visit the placing supervisor and/or OSP engineer will be able to observe any unusual situations that require special attention. The proposed placing route will be evaluated for its ability to support the planned placing procedure. One of the main objectives of the survey is to discover all potential pit-falls in the proposed placing operation so they may be accounted for in the final procedure.

General Issues

If possible, select a route that follows existing telecommunications infrastructure.Before any visit is made to a prospective construction site, an up-to-date plot plan showing the location of existing utilities shall be obtained from each of the utilities that will affect the construction operation. The plot plan shall be noted with details characterizing each utility and phone numbers to call if there are problems.

Select a route that provides easy access for workers, equipment, and materials. The placing route shall have a spacious and safe staging area convenient to the job site. The staging area shall be a location in which cable reels can be unloaded and stored prior to use with an all-weather surface. It shall also be a location at which fiber measurements can be made. It shall be secure from vandalism and theft. The aim of this paper is to provide a broad overview of developments in optical fibre technologies in the last mile, that is, between subscribersí premises and telecommunication switches and in the backhaul part, from the switches to the core of the network. Issues related to the deployment of last mile fibre networks, their costs and related regulatory issues are also raised. The timeframe for the paper is the period between 2010 and 2020. This is the period when the new generation of hybrid fibre and all-fibre networks will have matured and rolled out on a large scale. The significant increase in demand by users for higher broadband capacity is leading

Internet Service

Providers and telecommunication operators to place emphasis on how to meet the requirements for network capacity. In the last 20 years the focus was on using fibre in the backbone part of the network, up to the local Main Distribution Frames. In the coming years the focus will be on bringing fibre ever closer to the end-user in order to be able to deliver the desired bandwidth. For the period 2010-2020 speeds of 50 Mbit/s downstream and 10 Mbit/s upstream may be required to enable the parallel consumption of services (HDTV, radio, videoconferencing, security etc.) over the network. These speeds are significantly higher than the current OECD definition of broadband at 256 kbit/s, but are necessary to allow the end-user to enjoy a full range of services in parallel and to allow competition between the providers of these services over the network.

Hot Tags: GYTA optical cable 6 core, China, suppliers, manufacturers, factory
Related Products
  • Contact Us

    Add: No.101 B.S. Industrial Zone, Wangniudun Town, Dongguan City, Guangdong, China
    Tel: +86-769-81209595
    Mob: +8613242086178 (WeChat or Whatsapp)
    E-mail: milton@hgcable.cc
    Helen Golden: helen@hgcable.cc

  • Categories
  • Copyright © Dongguan Hongguang Cable Co.,Ltd All Rights Reserved.