Fiber Cable Manufacturer

TEL: +86-769-81209595
Categories
Contact Us

Add: No.101 B.S. Industrial Zone, Wangniudun Town, Dongguan City, Guangdong, China
Tel: +86-769-81209595
Mob: +8613242086178 (WeChat or Whatsapp)
E-mail: milton@hgcable.cc
Helen Golden: helen@hgcable.cc

GYTA Fiber Optic Cable 4 Core

The cable should never be loaded beyond its maximum tensile strength. Exceeding the cable's placing tension provided by Sterlite in the Cable Data Sheet/Specification, can alter cable and fiber performance and shorten its service lifetime.
Chat Now

1-288 cores  GYTA Armoured Optical Fiber Cable

Central strength member

1.8mm Steel

Outer diameter

Vary from 7 to 14mm

Application

Aerial ,duct, pipeline, underground

Cores available

2,4,6,8,12,24,36,48,72,96,144,288

Cores type

G652D,G657A,G655C

Attenuation @1310nm

 ≤0.36dB/km

Attenuation @1550nm

 ≤0.22dB/km

OEM/ODM

Yes

Package

1/2/3/4/5km km each exporting wooden drums

Cover

PE,HDPE

GYTA fiber cable2

Learn more about fiber optic cable:

Cable Placing Tension: 

Optical fiber cables are designed with a maximum tensile strength.

The cable should never be loaded beyond its maximum tensile strength. Exceeding the cable's placing tension provided by Sterlite in the Cable Data Sheet/Specification, can alter cable and fiber performance and shorten its service lifetime.

4.1 Cable Handling

4. Precautions

All optical fiber cables are sensitive to damage during shipping, handling, and installation.

Some of the important parameters that need special attention during cable installation are:

4.2 LED and Laser Precaution

LED and Laser beams used in fiber optic testing and transmission systems are invisible to the human eye and can seriously damage the eye. Viewing these beams directly may not cause any pain and the iris of the eye does not close automatically as it does while viewing a bright light. As a result the eye may not react to protect itself causing serious damage to result to the retina.

Therefore, Never look directly into a fiber end that has a laser or LED coupled to it.

Never look directly into a fiber end using any magnifying lense.

If an eye is accidentally exposed to an LED or laser beam, immediately seek medical attention.

Broken fiber ends created during termination and splicing can be dangerous. These ends are extremely sharp and can easily penetrate the skin. They invariably break off and are very hard to find and remove. Often tweezers and a magnifying glass are needed to remove them from the skin. Any delay in their removal could lead to an infection, which is dangerous. Hence,

4.3 Optical Fiber Handling Precautions

Be careful while handling the fibers.

Dispose of all scraps safely and properly.

Do not eat or drink near the installation area.

4.4 Material Safety

Fiber optic splicing and termination processes often use various chemical cleaners and adhesives. The safety instructions developed for these substances should be followed. If there is confusion in the usage of these products, ask their manufacturer for a Material Safety Data Sheet (MSDS). Remember the following instructions while working with these chemicals.

Always work in well-ventilated areas.

Avoid skin contact with these cleaning materials as much as possible.

Avoid using chemicals that cause allergic reactions.

Isopropyl alcohol, used as a cleaner is flammable and should be handled carefully.

Primary treatments for exposure to Isopropyl alcohol or Hexane used to clean fibers or cables are presented in Table 2.

Hot Tags: GYTA fiber optic cable 4 core, China, suppliers, manufacturers, factory
Related Products
  • Contact Us

    Add: No.101 B.S. Industrial Zone, Wangniudun Town, Dongguan City, Guangdong, China
    Tel: +86-769-81209595
    Mob: +8613242086178 (WeChat or Whatsapp)
    E-mail: milton@hgcable.cc
    Helen Golden: helen@hgcable.cc

  • Categories
  • Copyright © Dongguan Hongguang Cable Co.,Ltd All Rights Reserved.