Fiber Cable Manufacturer
GYTC8S-12,24,48,72,96 cores Figure 8 Aerial optical fiber cable
Cores available: 2,4,6,8,12,24,32,36,48,64,72,96,128,144.
Applications: Aerial networking system
Jackets: PE, HDPE
Multi modes: OM1,OM2,OM3,OM4
Single mode G652D,G655C,G657A1,G657A2
Package:1km/2km/3km/4km each reel.
Fiber Optic Cable Jacket Color Code
According to EIA/TIA-598, the fiber optic cable color code defines the jacket color codes for different fiber types (SMF or MMF). For single mode fiber, the jacket color is typically yellow. While for multimode cable, the jacket color can be orange (OM1 & OM2 cable), aqua (OM3 cable) and purple (OM4 cable). For outside plant cables, the standard jacket color is black. For more information about fiber optic cable color code, please refer to How to Identify the Fiber Optic Cable Color Code?
Fiber Optic Cable Fire Rating
Typically, there are eight levels of fire resistance for both non-conductive and conductive cables specified by NEC (National Electrical Code). All indoor fiber optic cables must be marked and installed properly for its intended use: plenums, risers and general purpose areas.
(1) A Plenum area is a building space used for air flow or air distribution system (drop ceiling and raised floors).
(2) A Riser area is a floor opening, shaft or duct that runs vertically through one or more floors.
(3) A general purpose area is all other area that is not plenum or riser and on the same floor.
Aerial Fiber Optic Cable Installation Guide
There are lots of unexpected factors occurring during the aerial fiber optic cable installation. Cable quantity and other materials must be ordered. Special requirements for sequencing the cable shipments must be specified in the cable order.
Outdoor fiber optic cable plant is harder than indoor optical cable installation. When deploying aerial fiber optic cable outside, some tools are essential. Here are some common tools for aerial fiber cable installation.