Fiber Cable Manufacturer
GYXTC8S 1-24 Core Figure 8 dropping aerial fiber optic cable
1. Messenger wire :7*1.0mm or 1*1.5mm steel or FRP
2. suspension neck part
3. PSP armored tape
4. Inner/ Outer jacket PE
5. Fiber single mode G652D
6. PBT Loose tube
7. FRP Strength Member
Application: aerial fiber optical cable networking system
Cores available: 2,4,6,8,12,24.
Cores type: G652D,G657A1,G657A2, G655C
Outer diameter: can be customized for you per your requirements.
Package: 1/2/3/4 km each exporting wooden drums.
More Academical knowledge for fiber optical cable:
Is OM5 Multimode Fiber Compatible With Existing Optical Transceiver?
In fact, OM5 fiber does not support existing optical transceiver. Usually, 40G and 100G SWDM4 optical transceiver can be used with OM5 fiber. The SWDM4 transceiver uses a complex short wavelength division multiplex (SWDM) technology. Signals at four wavelengths (850nm, 880nm, 910nm and 940nm) are transmitted over one fiber. And only two fibers are required for bidirectional transmission.
What Cable Jacket Color Will Be Used for OM5 Multimode Fiber?
TIA has specified lime green as the official cable jacket color for OM5.
OM5 vs OM4: Does OM5 Offer a Longer Transmission Distance than OM4?
Actually, for all current and future multimode IEEE applications including 40GBase-SR4, 100GBase-SR10, the maximum allowable distance is the same for OM5 as OM4. According to a recently done application testing with 40G-SWDM4 transceivers, it shows that 40G-SWDM4 could reach 400 meters over OM4 fiber, while over OM5 cable, the module can achieve link length up to 500 meters. Besides, if a data center is using non-IEEE-compliant 100G-SWDM4 transceivers, it proven that OM5 can support 150-meter reach—only 50 meters more than OM4.