Fiber Cable Manufacturer
ADSS Aerial Fiber Optic Cable 1-144 core
Cores available: 2,4,6,8,12,24,32,36,48,64,72,96,128,144.
Span: 50,100,150,200,250,300,400,500,1000 meters
Applications: Aerial networking system
Jackets: PE, HDPE,AT
Jackets layers: inner jacket+outer jacket.
Multi modes: OM1,OM2,OM3,OM4
Single mode G652D,G655C,G657A1,G657A2
Package:1km/2km/3km/4km each reel.
4.6 A good pre-survey should reveal clearances and separations on joint-use poles eliminating the need to rectify any issues when the cable is being placed. It will also qualify the condition and size of the existing poles and anchors to be used and reveal the need for any new poles before placement operations begin.
5.0 INSTALLATION METHODS
There are two primary methods used for placing ADSS cable. Both of these methods are very similar to those used to place most aerial cables. The first method is called the stationary reel method and the second is called the moving reel method, or the "Drive-off Method." The moving reel method is typically not recommended. The stationary reel method is used in urban areas where there is no vehicle access. The reel is placed on a reel stand or reel trailer at one end of the pull run. A braking device applies minimal braking tension to prevent overrun. Cable reel trailers should be disconnected from their towing vehicles, have the reel leveled and the trailer wheel securely chocked.