Fiber Cable Manufacturer
ADSS Aerial Fiber Optic Cable 1-144 core
Cores available: 2,4,6,8,12,24,32,36,48,64,72,96,128,144.
Span: 50,100,150,200,250,300,400,500,1000 meters
Applications: Aerial networking system
Jackets: PE, HDPE,AT
Jackets layers: inner jacket+outer jacket.
Multi modes: OM1,OM2,OM3,OM4
Single mode G652D,G655C,G657A1,G657A2
Package:1km/2km/3km/4km each reel.
More Academical knowledge for optical fiber cables:
Fiber optic cable is a high capacity transmission medium which can have its transmission characteristics degraded when subjected to excessive pulling force,sharp bends, and crushing forces. These losses may not be immediately revealed after installation. For these reasons extra care must be taken during the entire installation process.
Whenever cable from the reel is placed on pavement or other surfaces, it should be protected with barricades or cones to prevent possible vehicular or pedestrian traffic damage. Prior to pulling cable off of reel, the capboard covering the inside end must be removed and the inside end should be loosened.
Fiber optic cables are susceptible to performance degradation due to tight bending. The minimum bend radius of each cable is specified relative to the cable's diameter. HGGL requires the cable not be exposed to a bend radius smaller than 20 times the cable diameter during installation and after installation should not be exposed to a bend radius smaller than 10 times the cable diameter.
Since single mode fiber has less modal dispersion than multimode fiber, SM fiber has a higher bandwidth than multimode fiber.
The attenuation of multimode fiber is higher than SM fiber. The fiber core of single mode cable is very narrow, so the light that passed through these fiber optical cables is not reflected too many times, which keeps the attenuation to a minimum.
Single mode fiber has a greater distance than multimode fiber. Multimode fiber generally has a reach up to 2 km, whereas SM fiber has the potential to reach 200 km.