Outdoor 24 Core ADSS Optical Fiber Cable

ADSS Aerial Fiber Optic Cable 1-144 core

Cores available: 2,4,6,8,12,24,32,36,48,64,72,96,128,144.

Span: 50,100,150,200,250,300,400,500,1000 meters

Applications: Aerial networking system

Jackets: PE, HDPE,AT

Jackets layers: inner jacket+outer jacket.

Multi modes: OM1,OM2,OM3,OM4

Single mode G652D,G655C,G657A1,G657A2

Package:1km/2km/3km/4km each reel.

A "figure-eight" configuration should be used when the cable is removed from the reel and piled on the ground. This prevents kinking and twisting of the cable which could cause damage. Fiber optic cable should not be coiled in a continuous direction except for lengths of 30 meters (100 ft) or less. The preferred sized for the "figure-eight" is about 4.5 meters (15 ft) in length with each loop 1.5 meters (5ft) to 2.4 meters (8 ft) in diameter.

Note: Figure 8 machines should not be used without specific approval from

HGGL . Many Figure 8 machines do not control the cable bend radius and can cause cable damage. Specifically, the End-Again machine is not approved.

During the installation process, the cable should not experience sags, bends or twists that produce a bend radius smaller than the specified minimum bend radius. Failure to observe proper handling procedures during cable placement can void warranty and result in permanent damage to the transmission characteristics of the cable.